hall extraction
Clean hall air directly from the manufacturer
Hall extraction or hall ventilation is used for automatic air circulation, heat regulation and filtering of welding fumes, fine dust or oil mist from the hall air. This can be done via a central hall extraction system with a permanently installed pipe system or mobile filter towers.
The contaminated exhaust air is drawn in and welding fumes, dust and other emissions are efficiently filtered through several filter stages. Innovative heat recovery can preserve up to 70% of the thermal energy and drastically reduce energy costs. In order to provide our customers with an economical and energy-efficient hall ventilation system, we take numerous parameters into account and plan our solutions individually for the respective application, including the pipe system and installation.
Advantages
- Central ventilation control and high air quality
- Extraction of several workstations with constant suction power
- Most effective protection against industrial emissions without interrupting work
- Fully automatic operation
- Draft-free and low-noise airflow
- Automatic Jet-Pulse cleaning
- Individual unit color and branding
- High-quality products »Made in Germany«
Added value
- Low operating costs
- Separation efficiency up to 99.995%
- Heating cost savings of up to 70 %
- Flexibility for future hall use
- Increasing productivity and health
- Compliance with occupational health and safety regulations
- Extremely quiet and draught-free
Get individual advice now
We offer you a free and non-binding expert assessment of your application!
Technologies hall extraction systems
As a manufacturer of extraction systems and hall extraction, we supply complete systems from a single source. This includes: Captures, pipe system, extraction unit and other accessories. Integrate point captures such as extraction tables, extraction hoods or extraction arms. Optionally, we also offer cross heat exchangers, continuous mixing of fresh air and individual solutions for your application.
Push-Pull:
With push-pull mixing ventilation, the purified air is introduced via long throw nozzles of the supply air pipe at the hall ceiling and sucked in on the opposite side through extraction nozzles of the exhaust air pipe and filtered in an extraction unit. The hall air is mixed, particularly in the upper third of the hall, where the warm and polluted air collects.
Push-Pull Plus:
In Push-Pull Plus systems, additional air source emitters on the floor support the intrinsic thermal properties of the welding fumes. The contaminated air rises faster and is captured at the hall ceiling, passed through an extraction unit via a pipe system and filtered.
Layered Ventilation:
With the principle of stratified ventilation, the purified air is supplied via displacement outlets near the floor. The fresh air mixes again with pollutants, heats up and rises upwards due to its thermal properties, where it is extracted via the exhaust air pipe on the hall ceiling and cleaned in an extraction unit.
The principle of layered ventilation is also recommended by the IFA (Institute for Occupational Safety and Health of the German Social Accident Insurance). For more information, visit www.DGUV.de/ifa
Inverse layer ventilation:
In contrast to stratified ventilation, inverse stratified ventilation works in reverse. The cleaned air is blown towards the floor via jet nozzles in the fresh air duct at the ceiling of the hall. There, the clean air mixes with the polluted air and is captured again near the floor via extraction columns or extraction hoods and filtered in an extraction unit.
Industry sectors
Mechanical engineering
Welding companies
Food
Pharmaceuticals
Chemicals
Plastics
PROCESSES
Welding, grinding, polishing,
deburring, milling, sawing,
flame cutting, stapling, etc.
MEDIA
Dust/fine dust
Smoke/welding fumes
Oil mist/emulsion mist
Paint mist
Vapors
Aerosols
Chips
Odors
Save energy and heating costs!
Constant air quality and constant air circulation significantly improves the hall air and can save up to 70% on heating costs.
Individual hall extraction for every application
We configure an optimal hall extraction system for you and are your reliable partner not only until commissioning, but also in maintenance and service issues: Quality directly from the manufacturer.
FUME FILTER
DEDUSTER
FILTER UNITS
Filter towers for hall extraction
Filter towers can provide a quick remedy for welding fumes, oil mist and fine dust in production halls. The extraction units are placed in the hall without a fixed pipe system and only require 1.25 m² of floor space. At the same time, the filter tower ensures automatic heat regulation in the production hall and can save up to 70% on heating costs. By using a HEPA H14 filter, the filter tower also serves as a hall air purifier and efficiently filters the smallest particles such as viruses, spores and pollen from the room air.
Our filter tower was developed according to the plug & play principle and is ready for use within a few minutes: Storm + compressed air = off you go!
Welding fume extraction
Hall extraction
Air purifier
Planning, assembly and installation
of your hall extraction system
We accompany you personally in every phase of the completion of your hall extraction system. From the initial consultation to planning, installation, commissioning and after-sales service!
Hall extraction references
Every application is unique. When designing a hall extraction system, we therefore pay attention to numerous parameters in order to guarantee you the most economical solution.
Environmental protection & sustainability
We develop economical and energy-saving extraction systems using state-of-the-art technology. for a green industry of today and tomorrow.
Heating cost savings
up to 70 %
Lower energy costs
per year
Low maintenance
Low cleaning costs
for tools, machines and hall
Minimized pollution
Sustainable and
innovative technology
Flexible use & redesign
of production
Durable permanent filters
Get a 20% subsidy
for ventilation systems and hall extraction!
Eligible for funding are central, decentralized or room-by-room ventilation systems with heat recovery, demand-controlled exhaust air systems and compact systems with air/air heat exchangers and exhaust air heat pumps. BAFA subsidizes energy-efficient ventilation systems in industry with a subsidy of 20 %. We will be happy to assist you in applying for the funding.
Related Links:
‘ Federal funding for efficient buildings (BEG)
‘ Information on how to apply
Non-binding expert estimate
We offer comprehensive technical planning and advice.
Together with our sales team, we will find the right solution and create an individual offer for you.